FERRARI 348 89-95 ALPINE SERIES

Our Alpine Series is the best choice to keep the comfort of your exotic/sport car without affecting its value. This suspension system provides performance without sacrificing comfort; it provides everything you need to enjoy driving your car on the street or at the track. It can also be a good alternative to replace a costly factory suspension.

The Alpine Series has been designed to work in harmony with Swift springs, but we do offer to order them with regular SCALE springs to work with different budgets.

US$ 1 495.00 +tx

Version *

This version is designed to keep a really good comfort level while still improving handling performance over stock. This version is not designed to go more than approximately -0.5 to -1 inch from stock at minimum ride height setting. The OE replacement version is more used by people looking to replace a defect factory suspension, keep the stock look or slightly lowered and a decent comfort level.
The regular version is the mostly used configuration. It is designed to gives approximately 3 inch of adjustment range from stock ride height on most application. In default configuration, the spring rate used is the best to keep a close to OEM comfort level while improving handling performance and reducing suspension travel. It can also be customized with different spring rate for spirited driving or occasional track use. Regular version is normally designed to reach up to a tire to fender fitment at the lowest ride height setting.

Springs Selection *

Use high quality Scale black springs to reduce the cost of your Alpine series
(+US$ 313.95)
Made in Japan with high quality material, Swift offer the most precise and comfortable spring. Well known for their racing achievements, these are top of the line in linear springs.

Springs Color *

Powdercoating colour options for your springs. Color mixes are made on order so allow 1-2 additional weeks to have them done.

Default Black Color
Color swatch image
Root Beer (+US$ 165.00)
Color swatch image
Bloody Lips (+US$ 165.00)
Color swatch image
Ghost Grey (+US$ 165.00)
Color swatch image
Beach Ball Blue (+US$ 165.00)
Color swatch image
Illusion Purple (+US$ 165.00)
Color swatch image
Gold Digger (+US$ 165.00)
Color swatch image
Jamaican Teal (+US$ 165.00)
Color swatch image
Hot Rod Orange (+US$ 165.00)
Color swatch image
New York Yellow (+US$ 165.00)
Color swatch image
Firecracker Red (+US$ 165.00)
Color swatch image
Polar White (+US$ 165.00)
Color swatch image
Lollypop Lime (+US$ 165.00)
Color swatch image
Neon Yellow (+US$ 165.00)
Color swatch image
Custom Color (+US$ 200.00)
Order total:
Get it just right!

Wanna make sure what is the right product configuration for you?

About this coilover

The 1989-1995 Ferrari 348 Alpine series is the adjustable suspension system you need to consider if you want to improve handling performance or simply get an aggressive look by lowering the car to reach the fitment and ride height you were always looking for.

The monotube design configuration, added to the completely threaded body result in a fully adjustable long lasting suspension. As the ride height is set by the overall shock length, the spring preload, comfort level and suspension travel remains the same at any ride height setting compared to other suspension where the ride height is set by the spring seat, resulting in reducing the allowed travel as you lower the ride height.

The FR02-AS is offered in 2 different version depending the ride height range, comfort level and use each customer is looking for.

–       OE Replacement version: This version is designed to keep a really close to OEM comfort level while still improving handling performance over stock. This version is not designed to go more than -0.5 inch from stock at minimum ride height setting. The OE replacement version is more used by people looking to replace a damaged or old factory suspension and keep the stock look and comfort level.

–       Regular version: This version is the most used by customer looking to lower their Testarossa. It allow a ride height adjustment from stock to approximately -2.5 inch. Comfort level is still really acceptable for daily use but certainly have to feel sportier to prevent any rubbing issue when lowered. The stiffer spring rate and valving give significantly improved handling performance over stock.

This application use a double wishbone suspension configuration for both front and rear. This means that the shock have no direct impact on the wheel alignment. Every cars alignment is affected the more you lower it and depending on the suspension geometry. The 348 factory control arm don’t have any camber adjustment so if you plan to significanlty lower your car, your alignment specialist may offer you to add camber shims to get perfect wheel alignment to prevent excessive tire wear and optimal performance.

We can always customize the spring rate and shock length to fit your exact needs on this application.

All our Alpine series use stainless hardware, to ensure the suspension look like new for years,  Alpine series specific internal components and fluid and 24 dampening level to fine tune the comfort level/valving efficiency where you want it to be .

Feel free to email our sales for any specific needs so they can help you figure out the best configuration for you.

Specs

Additional information

Weight 48 lbs
Dimensions 13 × 13 × 26 in
Make

Model

Year

, , , , , ,

Suspension Type Front

Suspension Type Rear

Aluminium Type

Default Spring Color

Powdercoated Body

Anodized Body

Body Diameter

Internal Design

Shock Oil Type

Pressurized Charge

Assembly

Warranty

Condition

Availability

Timeframe for Delivery

Review(s)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Login

Subscribe to our newsletter