MITSUBISHI EVO 1/2/3 92-95 INNOVATIVE SERIES - SCALE suspension.com
MITSUBISHI EVO 1/2/3 92-95 INNOVATIVE SERIES COILOVER SUSPENSION SYSTEM View larger
FREE SHIPPING
on orders over $750 shipped within the contiguous U.S. only.

MITSUBISHI EVO 1/2/3 92-95 INNOVATIVE SERIES

New Product

Special Order : 6-12 week lead time

$1,145

$1,245

or as low as /month with



The Innovative Series is the best choice for street use, spirited driving and occasional track use. This coilover suspension provides improved performance while keeping really good comfort; it offers everything you need to enjoy driving your car.
The regular default version is designed to allow you to adjust the ride height from OEM to approximately 3 inch lowered (tire to fender fitment on most application). It also keep comfort level close to OEM ride quality.

Product Options
Low Version
Low Version
The low version is designed to give an additional inch of drop over the regular version range. It is also useful when using aggressive wheel specs to prevent rubbing issue. This version use shorter shocks and slightly stiffer springs to reduce suspension travel , this will reduce the comfort level compared to the regular version. Note that it is also one inch lower than the regular version when at maximal extension (Free option)
 
Yes
 
Extreme Low Version
Extreme Low Version
Extreme low version is a custom made setup for hardcore fitment, resulting in limited suspension travel, low comfort level and too small ground clearance for a daily driven vehicle. We suggest to email us to figure the spring rate needed to achieve your desired fitment. Some application may also require shorter springs only offered by Swift springs This version is normally more used for show cars our air out look on static suspension.
 
Yes
 
Gravitational Bearing
Gravitational Bearing
This option made to be used on front Macpherson suspension configuration using camber plates, allow the strut to turn freely when turning the wheels. It reduce the friction normally applied to camber plate pillowball and will ensure smooth operation for longer. The sealed bearing is made of stainless steel for resistance to corrosion.
 
Yes
 
Custom Springs Color
Custom Springs Color
Custom Powdercoating color for your springs. This option is made on order so we need 1-2 week to have them done. (Prices & delay may vary depending on selected color.)
ORIGINAL COLOR
 
ORIGINAL COLOR
 
RED HOT BLOODY LIPS
 
RED HOT BLOODY LIPS
 
GHOST GREY
 
GHOST GREY
 
POLAR WHITE
 
POLAR WHITE
 
ILLUSION PURPLE
 
ILLUSION PURPLE
 
BEACH BALL BLUE
 
BEACH BALL BLUE
 
JAMAICAN TEAL
 
JAMAICAN TEAL
 
NEON YELLOW
 
NEON YELLOW
 
HOT ROD ORANGE
 
HOT ROD ORANGE
 
LOLLYPOP LIME
 
LOLLYPOP LIME
 
CREME SODA PINK
 
CREME SODA PINK
 
GOLD DIGGER
 
GOLD DIGGER
 
FIRECRACKER RED
 
FIRECRACKER RED
 
ROOT BEER
 
ROOT BEER
 
NEW YORK YELLOW
 
NEW YORK YELLOW
 
CUSTOM COLOR (+$35)
 
CUSTOM COLOR (+$35)
 
Lock Ring Color
Lock Ring Color
Choose the anodized color of your lock rings between dark blue or black.
Blue
 
Blue
 
Black
 
Black
 
Custom Springs Rate
Custom Springs Rate
We can change the spring rates and damping based on your needs. If you have specific needs but have no spring rate in mind, please email us. (No additional costs)
Yes / Ex: 08/06kg F/R 
 
 
Swift Springs Upgrade
Swift Springs Upgrade
Made in Japan (High Quality Springs) offered in a large range of rate and size. This option may be needed on some extreme low version. Email us for additional information on the rate to fit your needs. (Prices may vary depending on option selected.)
SWIFT Yes / Ex: 08/06kg F/R 
 
 
Stainless Upgrade
Stainless Upgrade
This option replace regular steel hardware (top mount nuts and bolts) for stainless steel hardware. *rust proof*.
 
Yes
 
Rear Pillow Ball
Rear Pillow Ball
Rear Pillow Ball mounts top plate for people who want a more sensitive suspension feeling. Normally more used on racing application, it is not recommended for street use as it requires periodic maintenance and may transfer road noise to the chassis.( (Prices may vary depending on option selected.)
 
Yes
 
2-Way external adjuster
2-Way external adjuster
FOR RACING USE ONLY. This option add an external canister to lower internal temperature of the shock by having more fluid. This canister have a second damping knob allowing separate adjustment of low and high speed damping. (Prices may vary depending on option selected.)
 
Yes
 

The SCALE Mitsubishi Evo 1/2/3 92-95 Coilover is designed to achieve a perfect balance of street comfort and increased performance.This suspension system allows you to easily adjust your ride height while increasing handling performance.

Our patented technology scaled system is designed for an easier installation and to ensure equal height on each corner.

The Part # : MT04-IS coil over shocks is handcrafted to your specs at SCALE facilities.

The MacPhearson configuration of this model allow the use of camber plates as an option. If you need extra camber adjustment, this is a good thing to take this option.

The rear multilink configuration only have oem alignment adjustment but you can check in the product page to find the part you need among those offered by our different partners

In our mono-tube shock absorber, the shocks components are contained within one tube.

Within that cylinder, you would find a high-quality piston valve, synthetic oil, and high-pressure nitrogen gas.

The Mitsubishi Evo 1/2/3 92-95 replacement suspension comes with 6 kgf/mm front and 6 kgf/mm rear spring rates but can be customized to your needs.

Front Spring Rate (kgf/mm) 6kg (Default)
Rear Spring Rate (kgf/mm) 6kg (Default)
Suspension Type Front MacPhearson
Suspension Type Rear Multilink
Number of Valving Selections 12
Aluminium Type 6061-T6 CNC-Forged
Spring Color (Default) Black Gloss
Powdercoated Body Black Gloss
Anodized Body Black
Body Diameter (mm) M52X1.5
Internal Design Monotube
Shock Oil Type Synthetic Shock Oil
Pressurized Charge High Pressure Nitrogen gas
Welding Required No
Low Version Available? Yes
Extreme Low Available ? No
Rebuildable Yes
Warranty 2 Years

User Manual SCALE suspension PDF

Be sure to read the installation manual, maintenance guide, and warranty before installing your SCALE suspension to know all the recommendations and your responsibility. CAUTION This PDF contains important things to read prior to installation since the failure of one of these points VOID YOUR WARRANTY.

User Manual PDF (1.87M)

Write a review

MITSUBISHI EVO 1/2/3 92-95 INNOVATIVE SERIES

MITSUBISHI EVO 1/2/3 92-95 INNOVATIVE SERIES

The Innovative Series is the best choice for street use, spirited driving and occasional track use. This coilover suspension provides improved performance while keeping really good comfort; it offers everything you need to enjoy driving your car.
The regular default version is designed to allow you to adjust the ride height from OEM to approximately 3 inch lowered (tire to fender fitment on most application). It also keep comfort level close to OEM ride quality.

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
Have questions about this product? Ask a SPECIALIST.
hide form
MITSUBISHI EVO 1/2/3 92-95 INNOVATIVE SERIES https://scalesuspension.com/shop/1461-large/mitsubishi-evo-123-92-95-innovative-series.jpg

The SCALE Mitsubishi Evo 1/2/3 92-95 Coilover is designed to achieve a perfect balance of street comfort and increased performance.This suspension system allows you to easily adjust your ride height while increasing handling performance.

Our patented technology scaled system is designed for an easier installation and to ensure equal height on each corner.

The Part # : MT04-IS coil over shocks is handcrafted to your specs at SCALE facilities.

The MacPhearson configuration of this model allow the use of camber plates as an option. If you need extra camber adjustment, this is a good thing to take this option.

The rear multilink configuration only have oem alignment adjustment but you can check in the product page to find the part you need among those offered by our different partners

In our mono-tube shock absorber, the shocks components are contained within one tube.

Within that cylinder, you would find a high-quality piston valve, synthetic oil, and high-pressure nitrogen gas.

The Mitsubishi Evo 1/2/3 92-95 replacement suspension comes with 6 kgf/mm front and 6 kgf/mm rear spring rates but can be customized to your needs.

SCALE suspension mitsubishi 1145 USD new in_stock 0
Please wait...